What's VIN

Free Ford VIN Lookup and Decoder

Find great places to stay, eat, shop, or visit from local experts.

1fmdu15g4dla***** VIN lookup for 1983 FORD BRONCO (1fmdu15g4dla24934)

1983 FORD BRONCO
Get Full History Report
1fmdu15g4dla24934 VIN is assigned to 1983 FORD BRONCO with a . It is a MULTIPURPOSE PASSENGER VEHICLE (MPV) . It was manufactured by FORD MOTOR COMPANY. This 1983 BRONCO is a Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV).

Vehicle Descriptor 1FMDU15G*DL
Make FORD
Manufacturer Name FORD MOTOR COMPANY
Model Bronco
Model Year 1983
Plant City DETROIT
Vehicle Type MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country UNITED STATES (USA)
Plant State MICHIGAN
body Image Id 7
Body Class Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors 2
Gross Vehicle Weight Rating From Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Trailer Type Connection Not Applicable
Trailer Body Type Not Applicable
Drive Type 4WD/4-Wheel Drive/4x4
Brake System Type Hydraulic
Engine Numberof Cylinders 8
Displacement(CC) 5751.859464
Displacement(CI) 351
Displacement(L) 5.8
Engine Power(k W) 111.8550
Fuel Type- Primary Gasoline
Engine Configuration V-Shaped
Engine Brake(hp) From 150
Engine Brake(hp) To 210
Engine Manufacturer Ford
Seat Belt Type Manual
NCSA Body Type Large utility (ANSI D16.1 Utility Vehicle Categories and "Full Size" and "Large")
NCSA Make Ford
NCSA Model Bronco-fullsize (1978-on)
Bus Floor Configuration Type Not Applicable
Bus Type Not Applicable
Custom Motorcycle Type Not Applicable
Motorcycle Suspension Type Not Applicable
Motorcycle Chassis Type Not Applicable

Driver Complaints

Recalls

Manufacturer: FORD MOTOR COMPANY
Components: SEATS
Potential Number of Units Affected: 22
Description:
THE MANUFACTURER SUSPECTS THAT THE HARDWARE THAT ATTACHES THE SEAT TRACKS (THE STRIPS THAT THE SEAT SLIDES ON) TO THE FLOOR MAY BECOME LOOSE OR MAY FAIL TO HOLD THE SEAT IN PLACE DURING A COLLISION. THIS CONDITION IS DUE TO THE SUBSTITUTION OF AN INCORRECT WASHER DURING MANUFACTURE. THE VEHICLES MAY NOT COMPLY WITH THE STRENGTH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 207, "SEATING SYSTEMS".
Remedy:
THE DEALER WILL INSPECT AND INSTALL ADDITIONAL LARGER DIAMETER WASHERS ON THE BOLT ASSEMBLY.
Notes:
VEHICLE DESCRIPTION: LIGHT TRUCKS EQUIPPED WITH BENCH SEATS.SYSTEM: INTERIOR SYSTEMS; SEAT TRACK ATTACHMENT BOLTS.CONSEQUENCES OF DEFECT: THIS DEFECT COULD CAUSE THE SEAT ASSEMBLY TO BECOMEDETACHED DURING AN ACCIDENT, INCREASING THE CHANCES OF PASSENGER INJURY.NOTE: A RATTLING NOISE MAY INDICATE A LOOSENING OF THE SEAT BELT TRACK BOLT.

Manufacturer: FEDERAL-MOGUL CORPORATION
Components: FUEL SYSTEM, GASOLINE
Potential Number of Units Affected: 34,000
Description:
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
Remedy:
FEDERAL-MOGUL WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMPS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 15, 2007. OWNERS CAN CONTACT FEDERAL-MOGUL AT 248-354-7700.
Notes:
THIS RECALL ONLY PERTAINS TO AFTERMARKET CARTER, NAPA, ACCUFLOW, TRU FLOW, PARTS MASTER, AND PARTS DEPOT BRAND FUEL PUMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED MOTOR VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.